Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3 x 3750X stackwise and stackpower cable connection

I have three 3750X switches needed to stacked with full bandwidth and redundancy. I am new in stacking switches. Do anyone can give me suggestion how the stackwise and stackpower cable connection ?

Is it practical on below connection for full bandswitch and redundancy ?

Stackwise

Switch 1 Stack 2 -- Switch 2 Stack 1

Switch 2 Stack 2 -- Switch 3 Stack 1

Switch 3 Stack 2 -- Switch 1 Stack 1

 

Stackpower

Switch 1 Bottom -- Switch 2 Upper

Switch 2 Bottom -- Switch 3 Upper

Switch 3 Bottom -- Switch 1 Upper.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Hi, This looks good, the

Hi,

 

This looks good, the connections will have redundancy the way the you plan to do it. Below is a link that covers stack creation and questions:

 

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html

 

Hope this helps, and remeber to rate any useful posts.

Regards

2 REPLIES
Silver

Hi, This looks good, the

Hi,

 

This looks good, the connections will have redundancy the way the you plan to do it. Below is a link that covers stack creation and questions:

 

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html

 

Hope this helps, and remeber to rate any useful posts.

Regards

Super Bronze

DisclaimerThe Author of this

  • Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Actually cabling doesn't really matter, per se, although StackPower has an amperage limitation between stack members,  So power supplies should be placed to try to minimize Stack power draw, including when a power supply fails.

This whitepaper explains further: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3750-x-series-switches/white_paper_c11-578931.html

70
Views
0
Helpful
2
Replies