Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3500 XL IOS upgrdation

Hi all,

Can any one tells me how to do IOS upgrdation on 3524 XL switch

thanks in advance

Patil

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 3500 XL IOS upgrdation

HI

First u need to delete the below files from the flash.

c3500xl-c3h2s-mz.120-5.WC14.bin

c3500XL-hdiag-mz-120.5.3.WC.1

after deleting the files dnot restart the switch and after that u can follow the normal tftp procedure.

after the image is copied set the boot path

boot system flash:imagename.

Thanks

Mahmood

6 REPLIES
Hall of Fame Super Silver

Re: 3500 XL IOS upgrdation

Hello Patil,

you can find the procedure here

www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml')">http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml

the tftp procedure is the one typically used.

you need a TFTP server on your PC.

be aware that the switch is in EOS.

To download a suitable IOS image for it you may need to go from

www.cisco.com

quick links -> documentation

then you select end of sale end of support products

go to the switches section and select 3500 XL

or you go directly to

http://www.cisco.com/en/US/products/hw/switches/ps637/tsd_products_support_eol_series_home.html

you need a CCO account with enough privileges and associated to a valid contract that includes the C3500XL platform to be able to download

Hope to help

Giuseppe

New Member

Re: 3500 XL IOS upgrdation

Dear

Thanks very much for the update.

I have already done it for 12 stack Switches but i have problem with 3524 XL switches

-----------------

#sh fla

001M1#sh flash:

Directory of flash:/

2 drwx 704 Mar 01 1993 00:03:08 html

4 -rwx 109 Mar 01 1993 00:01:37 info

5 -rwx 1811003 May 12 1993 00:26:06 c3500xl-c3h2s-mz.120-5.WC14.bin

16 -rwx 109 Mar 01 1993 00:03:08 info.ver

17 -rwx 94375 Mar 01 1993 00:03:24 c3500XL-hdiag-mz-120.5.3.WC.1

19 -rwx 1852 Nov 07 2008 14:45:29 vlan.dat

20 -rwx 355 May 12 1993 00:24:20 env_vars

21 -rwx 6474 Nov 25 2008 15:49:45 config.text

3612672 bytes total (294400 bytes free)

#tar ?

/table List files in tar file

/xtract Extract files in tar file

M1#tar /x ?

WORD Tar filename

ATLFAC2001M1#tar /x

----------------------

I am not sure and confused how to upgrade from TFTP, could you please tell me in steps

Thanks very much for great help

Patil

Re: 3500 XL IOS upgrdation

HI

First u need to delete the below files from the flash.

c3500xl-c3h2s-mz.120-5.WC14.bin

c3500XL-hdiag-mz-120.5.3.WC.1

after deleting the files dnot restart the switch and after that u can follow the normal tftp procedure.

after the image is copied set the boot path

boot system flash:imagename.

Thanks

Mahmood

New Member

Re: 3500 XL IOS upgrdation

Hi

Thanks for the update

normal copy tftp flash commda works for this 3524 XL switch since every document talks about tar file

thanks

Patil

New Member

Re: 3500 XL IOS upgrdation

Dear All,

Thanks very much for all,

Have done with IOS upgrdation on 3500 XL switches, Please find the logs as attahcment

regards

Patil

Re: 3500 XL IOS upgrdation

hello,

I hope this helps:

1. Install TFTP on your system (say desktop).

2. Download the required IOS & save it on your desktop (location where your TFTP server is present)

3. While downloading the IOS image from Cisco, please make a note of the MD5 value present.

4. Telnet to the switch (you can configure it via console as well) & give the command :

copy tftp: flash:

This will prompt the follwing:

Source filename []? xxxxx.bin (provide the image name stored on your desktop)

Address or name of remote host []? xx.xx.xx.xx (your system IP address)

Destination filename [] ? xxxxx.bin (Same name as the source filename to be provided)

5. Now, the copying will start & will take some time. Once it is copied, it will mention as copying is done.

6. give 'dir' command and check if you see the new image preset.

7. verify the IOS (Ex: verify bootflash:xxxx.bin)

8. verify /md5 bootflash:xxxxxx.bin

(ensure that this md5 value is the same as the one obtained while downloading the image from Cisco)

Change the boot sequence & save the configurations. Once done, reload the switch & verify if the switch has booted up with the new image.

797
Views
0
Helpful
6
Replies