Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

3550-12g will not boot ios

trying to load the c-3550-ipservicesk9-mz.122-25.sed.bin. It will not load but gives a the 'switch' prompt. What are my options at this point?

2 REPLIES

Re: 3550-12g will not boot ios

Hi

U need to recover the IOS from xmodem.

Thanks

Mahmood

Bronze

Re: 3550-12g will not boot ios

I guess you're at the switch: prompt?

If so, try "dir flash:", you may need to run "flash_init" first.

You should then see the available images (if any).

Has the switch recently been upgraded? If so there may be a boot statement pointing to the previous image.

Use "set" and check that the BOOT= either matches the image you are trying load or is blank.

HTH

136
Views
0
Helpful
2
Replies
CreatePlease to create content