Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

3550-48T Post Issue

I have a 3550 that upon power on, ports light up green, status flashes green. After 1 or 2 seconds, the status light goes solid amber, port 1 is solid amber and all other ports are solid green. I've searched for the order of the post tests to tell what is failing and if its recoverable or not. Any one with a suggestion as to whats next, would be greatly appreciated. Internally, i dont see any damage (water, arcing, etc.)

10 REPLIES

Re: 3550-48T Post Issue

Hi,

I would really suggest you connect a pc with console cable to the switch and check the errors it shows there, if any.
Perhaps copy-paste them here.

Sent from Cisco Technical Support iPad App

3550-48T Post Issue

Srry, yeah I ment to mention that too, No output with console cable connected. Its weird.

VIP Super Bronze

3550-48T Post Issue

Are you connecting the console cable to the right com port?

to verify click on start/devices and printer

HTH

3550-48T Post Issue

yes, I know for a fact the console port, system, cable, etc is working and that the lack of input is from the switch.

Hall of Fame Super Gold

3550-48T Post Issue

Duplicate post. 

3550-48T Post Issue

again, thought the other didnt get posted so i reposted.

Hall of Fame Super Gold

3550-48T Post Issue

again, thought the other didnt get posted so i reposted.

Please delete the other thread.

3550-48T Post Issue

1) I dont know how, I looked and i dont see where to delete

2) If you have nothing to contribute, dont post.

Hall of Fame Super Gold

3550-48T Post Issue

2) If you have nothing to contribute, dont post.

Fortunately, I DO HAVE something to contribute. 

I'm just pointing out some of the difficulties experienced by people when someone makes multiple posts of the same issue.  A lot of people make multiple posts hoping, like a shotgun-approach, someone MIGHT respond.  Unfortunately, this can be a detriment because no one knows WHICH THREAD to post the response.

Like I said, I have something to contribute to your THREADS, but I just don't know WHICH THREAD to respond to because you've created multiple threads of the same post.

3550-48T Post Issue

Again, as I have stated before, twice actually. I thought my first post didnt go through, I checked the history and it didnt show any active discussions, so I posted it again. After the second post, a period of about 30 minutes, both were posted. I tried to delete the first post but I cannot find where to do it. Ive explained this now 4 times. I dont know how else to clarify this to you anymore than I already have. I am not "shotgun posting". Its not really a detriment to the resolution, as if the individual replies to either thread posted by me, I'll see the post. Like you've seen both posts and commented on both. I dont understand why you cant get over the posting mistake, NOBODY cares except you. You clearly have nothing to add as you havent added anything constructive, just complaining about the posts. I didnt expect a resolution from these forums and its people like you that ruin them. Thank you for jack.

333
Views
1
Helpful
10
Replies