Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3550 and access-group command

Hi all. Can you not use the access-group command on a 3550 switch with ipservices IOS on it? I can create an access-list, but can seem to apply it to an vlan interface or routed interface. Anyone have any thoughts?

4 REPLIES

Re: 3550 and access-group command

It is supported on the IP services image and you should be able to apply access-group on the routed interface. You can create VACLS to set the filtering on the vlan interface. Please find the link below for the creating security acls on 3550:

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225seb/scg/swacl.htm#wp1107203

Please paste " show version " and "show run " from your switch, if you still face any problem.

HTH,

-amit singh

Silver

Re: 3550 and access-group command

Make sure you are entering the right command it should be "ip access-group ACL_NAME in"

Let me know how it goes,

Regards,

New Member

Re: 3550 and access-group command

I mistyped. Thanks.

Silver

Re: 3550 and access-group command

Hello,

Glad I could help and thanks for the rating.

Regards,

217
Views
4
Helpful
4
Replies
CreatePlease login to create content