01-02-2007 02:49 PM - edited 03-05-2019 01:33 PM
Hi all. Can you not use the access-group command on a 3550 switch with ipservices IOS on it? I can create an access-list, but can seem to apply it to an vlan interface or routed interface. Anyone have any thoughts?
01-02-2007 08:42 PM
It is supported on the IP services image and you should be able to apply access-group on the routed interface. You can create VACLS to set the filtering on the vlan interface. Please find the link below for the creating security acls on 3550:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225seb/scg/swacl.htm#wp1107203
Please paste " show version " and "show run " from your switch, if you still face any problem.
HTH,
-amit singh
01-03-2007 08:59 AM
Make sure you are entering the right command it should be "ip access-group ACL_NAME in"
Let me know how it goes,
Regards,
01-03-2007 09:37 PM
I mistyped. Thanks.
01-04-2007 09:06 AM
Hello,
Glad I could help and thanks for the rating.
Regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: