I'm trying to create a vlan on a 3550. the vlan parameter is not showing under config. I've created vlans on this switch before. any ideas??? am I missing something obvious?
Switch(config)#? Configure commands: aaa Authentication, Authorization and Accounting. access-list Add an access list entry alias Create command alias arp Set a static ARP entry banner Define a login banner boot Boot Commands buffers Adjust system buffer pool parameters cdp Global CDP configuration subcommands cgmp Global CGMP configuration commands class-map Configure QoS Class Map clock Configure time-of-day clock cluster Cluster configuration commands default Set a command to its defaults default-value Default character-bits values downward-compatible-config Generate a configuration compatible with older software enable Modify enable password parameters end Exit from configure mode errdisable Error disable exception Exception handling exit Exit from configure mode file Adjust file system parameters help Description of the interactive help system hostname Set system's network name interface Select an interface to configure ip Global IP configuration subcommands line Configure a terminal line logging Modify message logging facilities mac-address-table Configure the MAC address table map-class Configure static map class map-list Configure static map list mvr Enable/Disable MVR on the switch no Negate a command or set its defaults ntp Configure NTP policy-map Configure QoS Policy Map power power configuration priority-list Build a priority list privilege Command privilege parameters queue-list Build a custom queue list rmon Remote Monitoring scheduler Scheduler parameters service Modify use of network based services shutdown Shutdown system elements snmp-server Modify SNMP parameters spanning-tree Spanning Tree Subsystem stackmaker Specify stack name and add its member tacacs-server Modify TACACS query parameters tftp-server Provide TFTP service for netload requests time-range Define time range entries udld Configure global UDLD setting username Establish User Name Authentication vmps VMPS settings vtp Configure global VTP state
Switch(config)#vlan 50 ^ % Invalid input detected at '^' marker.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...