Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

3550 Problem resetting the configurations - Please help!

I'm trying to integrate a couple of 3550's into our current network and need some help resetting their IP's. The instructions from the Cisco guide are not working, as when I press and hold the "Mode" button, nothing happens.

Has anyone else had this problem and does anyone know what might work?

Thanks

1 REPLY

Re: 3550 Problem resetting the configurations - Please help!

It sounds like the express setup might be disabled in the switch. If express setup is disabled Mode button doesn't work.

http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst3550/software/release/12.1_14_ea1/command/reference/cli2.html

HTH

Sundar

139
Views
0
Helpful
1
Replies
CreatePlease to create content