Im trying to see if my 3550 supports me being able to track if a particular IP Address is available or not, so that I can change routing based on that. This sits on a LAN and Id like to base routing on whether two destinations are available or not, but the destinations are beyond the perimeter edge. Any idea if you can do that with a 3550?
AFAIK, 3550 doesn't support object tracking. As far as your 2nd question goes, object tracking can track destination(s) anywhere as long as you have IP reachability and it doesn't have to be within your network. If you have a firewall sitting between your inside and perimeter device then make sure the access rules on the firewall allow the tracking traffic is allowed both ways.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.