Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

3560-DHCP SERVER

THERE IS NETWORK ( IN ATTACHMENTS) AT THE CUSTOMER SITE. 3560G SWITCH IS DHCP SERVER FOR ALL REMOTE SUBNETS ( HOTELS AND HEADQUARTER HQ ARE CONNECTED THROUGH OPTICAL SWITCH - METRONET). WE HAVE PROBLEM WITH DHCP IP ADDRESS ETC IN HOTEL RIVA. IN THIS MOMENT WE HAVE 16 FIXED IP AND 14 DHCP IP ADDRESS, BUT DHCP SERVER CAN'T GAVE MORE THAN 7 THE DHCP IP ADDRESS.this number is not the same , 3 days ago it was 12 DHCP ip address???

WE HAVE INSTALLED NEW IOS 15 DAYS AGO ON ALL SITES. PLEASE LOOK AT OUR CONFIGURATION FILES

1 REPLY
New Member

Re: 3560-DHCP SERVER

Hi,

This access list statement:

permit udp host 0.0.0.0 eq bootpc host 255.255.255.255 eq bootps

should work, but whenever I see this statement referred to in documentation, it is applied to the SVI (vlan interface) rather than the individual fastethernet interfaces. In this case, maybe you should try changing "255.255.255.255" to the default gateway address of vlan 181 (you're 3560G DHCP server). It's just a stab in the dark, but give it a shot.

-Chris

115
Views
0
Helpful
1
Replies
CreatePlease to create content