08-11-2009 06:10 AM - edited 03-06-2019 07:11 AM
I received a 3560 replacement switch without an IOS. I have the IOS for the switch on hand. What would be best practice to load a new IOS on a 3560 switch?
Solved! Go to Solution.
08-11-2009 06:18 AM
Look for Document 41845..."Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image"
I have attached the document.
Mike
08-11-2009 06:19 AM
Hi Jaime,
Does your switch goes straight into the ROMMON? You can use XMODEM to load the IOS into the flash, but this process is extreme time consuming.
HTH,
jerry
08-11-2009 06:18 AM
08-11-2009 06:19 AM
Hi Jaime,
Does your switch goes straight into the ROMMON? You can use XMODEM to load the IOS into the flash, but this process is extreme time consuming.
HTH,
jerry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide