3560 IOS

[jaimegarcia45]

I received a 3560 replacement switch without an IOS. I have the IOS for the switch on hand. What would be best practice to load a new IOS on a 3560 switch?

[burleyman · Accepted solution]

Look for Document 41845..."Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image"

I have attached the document.

Mike

[Jerry Ye · Accepted solution]

Hi Jaime,

Does your switch goes straight into the ROMMON? You can use XMODEM to load the IOS into the flash, but this process is extreme time consuming.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swtrbl.html#wp1099467

HTH,

jerry