Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3560 IOS

I received a 3560 replacement switch without an IOS. I have the IOS for the switch on hand. What would be best practice to load a new IOS on a 3560 switch?

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: 3560 IOS

Look for Document 41845..."Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image"

I have attached the document.

Mike

Cisco Employee

Re: 3560 IOS

Hi Jaime,

Does your switch goes straight into the ROMMON? You can use XMODEM to load the IOS into the flash, but this process is extreme time consuming.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swtrbl.html#wp1099467

HTH,

jerry

2 REPLIES

Re: 3560 IOS

Look for Document 41845..."Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image"

I have attached the document.

Mike

Cisco Employee

Re: 3560 IOS

Hi Jaime,

Does your switch goes straight into the ROMMON? You can use XMODEM to load the IOS into the flash, but this process is extreme time consuming.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swtrbl.html#wp1099467

HTH,

jerry

386
Views
0
Helpful
2
Replies