01-15-2008 07:27 AM - edited 03-05-2019 08:29 PM
Is there a way to display the matches on an ACL used in a policy-map (normally I'd use 'show ip access-lists') I've read its something to do with how the ACL is processed in H/W or S/W.
The following command also shows '0'
'sh policy-map interface fa0/20 input' but I know the policy is working (tested and snmp monitor)
C3560-24TS 12.2(25)SEE2 IPBASE image
Solved! Go to Solution.
01-15-2008 03:59 PM
This is an ASIC limitation on the 3560/3750 switches. It doesn't keep any ACL or QoS policy counters for packets switched in hardware.
You can use 'show mls qos interface
4500 and 6500 dont have this limitation.
01-15-2008 03:59 PM
This is an ASIC limitation on the 3560/3750 switches. It doesn't keep any ACL or QoS policy counters for packets switched in hardware.
You can use 'show mls qos interface
4500 and 6500 dont have this limitation.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide