Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3560 POE issues

Hi Guys

i have a 3560 running IOS 'c3560-ipservices-mz.122-25.SEB4.bin'

When i connect a cicso ip phone into the port it goes into err-disable. when i do a show power inline f0/19 it says inline power is not supported on this interface. This is the case for all interfaces...

The power available is showing as zero.. why is this?

I checked the feature navigator and it seems as though this hardware and IOS should support poe, anyone got any ideas??

Switch#sho power inline

Available:0.0(w) Used:0.0(w) Remaining:0.0(w)

Interface Admin Oper Power Device Class Max

(Watts)

--------- ------ ---------- ------- ------------------- ----- ----

Switch#

Switch#sho power inline f0/19

Interface Fa0/19: inline power not supported

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 3560 POE issues

The 3560 does support POE but not every model.

What is the model of your 3560

Below is a link to the 3560's with and without POE support :-

hxxp://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7f.html

2 REPLIES

Re: 3560 POE issues

The 3560 does support POE but not every model.

What is the model of your 3560

Below is a link to the 3560's with and without POE support :-

hxxp://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7f.html

New Member

Re: 3560 POE issues

WS-C3560-24TS-E

Looking at the data sheet it does not support poe.

Thanks for clearing this up.

519
Views
0
Helpful
2
Replies