Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3560 policy based routing verify-availability

Cisco 3560 does not support "set ip next-hop verify-availabilty". I need this command in my config. "set ip next-hop"  do not do the same job.

What can i do?

any other related command in replace of it?

8 REPLIES
New Member

3560 policy based routing verify-availability

Hi There,

It does support it, I have it on my 3560G.

What version of code are you running?

Dan

New Member

3560 policy based routing verify-availability

SW version 12.2.(50)SE3

Sw image C3560-IPSERVICESK9-M

and switch hardware 3560v2

New Member

3560 policy based routing verify-availability

ok, upgrade to the following as you can see that it is supported on my 3560G

route-map PBR-Management permit 30
match ip address Route-Map-ACL-Management-Process3
set ip next-hop verify-availability 10.11.120.161 1 track 30

Cisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(58)SE2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 21-Jul-11 01:44 by prod_rel_team

ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)

SL-Cisco-3560G-SW uptime is 12 hours, 36 minutes
System returned to ROM by power-on
System image file is "flash:c3560-ipservicesk9-mz.122-58.SE2.bin"

New Member

3560 policy based routing verify-availability

Yes in my ios there is also this config shown. But when i insert another sequence like

"route-map PBR-Management permit 40", debug says unsupported.

Do you have many sequence with the same name. Like

route-map PBR-Management permit 30

route-map PBR-Management permit 40

route-map PBR-Management permit 50

And is it running correctly?

And also this link says set ip next-hop verify-availability is not supported.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_58_se/configuration/guide/swuncli.html

New Member

3560 policy based routing verify-availability

yes I do jave the sequence, as shown below - one problem I am having is getting the route map on the interface as it allows the command but doesnt show the route map in the config.

route-map PBR-Management permit 10

match ip address Route-Map-ACL-Management-Process1

set ip next-hop verify-availability 10.11.120.161 1 track 610

!

route-map PBR-Management permit 20

match ip address Route-Map-ACL-Management-Process2

set ip next-hop verify-availability 10.11.120.161 1 track 620

!

route-map PBR-Management permit 30

match ip address Route-Map-ACL-Management-Process3

set ip next-hop verify-availability 10.11.120.161 1 track 630

!

route-map PBR-Management permit 40

match ip address Route-Map-ACL-Management-Information

set ip next-hop verify-availability 10.11.120.161 1 track 640

!

route-map PBR-Management permit 50

match ip address Route-Map-ACL-Management-Supervisory

set ip next-hop verify-availability 10.11.120.161 1 track 650

route-map PBR-Management permit 10

match ip address Route-Map-ACL-Management-Process1

set ip next-hop verify-availability 10.11.120.161 1 track 610

!

route-map PBR-Management permit 20

match ip address Route-Map-ACL-Management-Process2

set ip next-hop verify-availability 10.11.120.161 1 track 620

!

route-map PBR-Management permit 30

match ip address Route-Map-ACL-Management-Process3

set ip next-hop verify-availability 10.11.120.161 1 track 630

!

route-map PBR-Management permit 40

match ip address Route-Map-ACL-Management-Information

set ip next-hop verify-availability 10.11.120.161 1 track 640

!

route-map PBR-Management permit 50

match ip address Route-Map-ACL-Management-Supervisory

set ip next-hop verify-availability 10.11.120.161 1 track 650

New Member

3560 policy based routing verify-availability

same problem with me i think.

I have also do these. But when show running config, there is no ip policy route-map command. And when typing show ip policy it is blank.

when you connect via serial port, and open the "debug ip policy" and set another sequence to the PBR-Management

you have also see unsupported messaage.

New Member

3560 policy based routing verify-availability

any update daniel

New Member

3560 policy based routing verify-availability

anyone help me?

1535
Views
0
Helpful
8
Replies
CreatePlease login to create content