Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3560 policy doesn't work

I'm trying to applied a policy input in interface of 3560 to limite the traffic but it doesn't work. The config is simple:

!

class-map match-all prueba

match access-group 99

!

!

policy-map prueba

class prueba

police 10000000 8000 exceed-action drop

!

interface GigabitEthernet0/33

service-policy input prueba

!

Thank's

Marcelo

3 REPLIES
New Member

Re: 3560 policy doesn't work

Hi Marcelo,

Did you enable mls qos (global command)?

What does your access-list 99 look like?

Also post your show policy-map interface GigabitEthernet0/33 output.

New Member

Re: 3560 policy doesn't work

global mls is disabled.

99 is an standard ip access-list:

access-list 99 permit 76.253.168.52

sh policy-map interface gigabitEthernet 0/33

GigabitEthernet0/33

Service-policy input: prueba

Class-map: prueba (match-all)

0 packets, 0 bytes

offered rate 0 bps, drop rate 0 bps

Match: access-group 99

Class-map: class-default (match-any)

0 packets, 0 bytes

offered rate 0 bps, drop rate 0 bps

Match: any

0 packets, 0 bytes

rate 0 bps

Bronze

Re: 3560 policy doesn't work

You have to enable mls:

mls qos

HTH

164
Views
0
Helpful
3
Replies