Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3560 Switch clock setting went back to default after reload

Any one has encountered problem with clock set of Cisco 3560 Switch? I have 2 Cisco 3560 switches with model type and IOS version as below:

System image file is "flash:c3560-ipbase-mz.122-25.SEE2/c3560-ipbase-mz.122-25.SEE2.bin

Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)

The problem is that after I did the clock set, write mem and reload the switch, the clock setting just went back to factory default.

Will it be the battery issue? Pls help

2 REPLIES

Re: 3560 Switch clock setting went back to default after reload

Your absolutely correct, there is not battery backup for the clock for the 3560, the same can be said for all the other low end switches like 2900 XL, 3500 XL, 2950, 3550, 3750.

Unfortunately you will have manually configure the clock after each reload unless you use NTP.

Rgds

Allan.

Re: 3560 Switch clock setting went back to default after reload

Hi Somnath,

If i were in your shoes, i would have used NTP.

523
Views
0
Helpful
2
Replies
CreatePlease to create content