Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

3560 switch config

Having trouble configuring a new switch.Switch B port 48 is connecting to switch A port 37.

Don't know what i have done wrong.

Attached are the running config from both switchs.

Thanks for the help.

 

  • LAN Switching and Routing
2 REPLIES

Can you tell us a little

Can you tell us a little about the problem that you're having?

HTH, John *** Please rate all useful posts ***
New Member

My dear let us begin from

My dear let us begin from scratch.

why do you have below settings on switch A on port 37

 switchport trunk allowed vlan 1,5,10,25,100
 switchport mode access

let us do simple things first.  ( make port setting of switch A prot 37 and switch B port 48 as default ).

and then simply trunk and check.

 

if all works well, and use vlan allow command on it.

 

hope this helps.

 

32
Views
0
Helpful
2
Replies
This widget could not be displayed.