I have a cisco 3560X 48 port Ip base switch with vlan configured and ip routing. Ports 1 and 2 are in etherchannel and routed ports to ASA and have their own network of 192.168.22.49/30. The ASA is configured with the same config for ports 1 and 2. The channel group ip address on the 3560X is 192.168.22.49/30 while the other end of the uplink is the ASA and its configured with .50/30.
I have 6 vlans plus the one native vlan. They are all configured with ip addresses. Each Vlan should be able to talk to one another other than DMZ vlan which is trunked and routed directly in the ASA. On the switch I can ping the IP address on the ASAs uplink .50/30 but I cannot ping the ASA from any host on any of the Vlans. My switch config file is posted below. The ASA seems to be able to ping any host in the VLANS due to static routes that are in place.
Any idea as to why Im not able to communicate to other vlans or even ping the ASA?
Config for 3560X
Current configuration : 8056 bytes
! Last configuration change at 00:45:43 UTC Mon Mar 8 1993
Thanks for the reply. My port channel interface looks identical to your config posted above. The other settings in the ASA look like yours posted above also. I am also unable to ping any other vlan default gateway on the switch itself, other than the default gateway the host is in. From my understanding all hosts on the switch should be able to communicate wih other vlans as long as ip routing is enabled on the switch, correct? The switch is running the latest version 15 of ios.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.