Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3560X port numbering/interfaces

           On a 3560X, 24-port, the first 24 ports are numbered 0/1 - 24, correct?  For the optional Network/Service Module, are the 4 ports numbered 0/25 - 0/28?  Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: 3560X port numbering/interfaces

Hi,

See this,

   Network Module Interfaces

The uplink ports on the 10 Gigabit service module and on the 10 Gigabit Ethernet network module are labeled Te1/Gi2 and Te2/Gi4. These ports can operate at either 1 Gigabit per second or 10 Gigabits per second. They are identified in software as gigabitethernet x/1/2 and x/1/4 andtengigabitethernet x/1/1 and x/1/2, with x being the switch number on Catalyst 3750-X stacks. The Catalyst 3560-X switch port numbers are the same, with no switch number.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/15.0_1_se/configuration/guide/swint.html#wp1878796

Hope this helps.

4 REPLIES
Silver

Re: 3560X port numbering/interfaces

Hi,

See this,

   Network Module Interfaces

The uplink ports on the 10 Gigabit service module and on the 10 Gigabit Ethernet network module are labeled Te1/Gi2 and Te2/Gi4. These ports can operate at either 1 Gigabit per second or 10 Gigabits per second. They are identified in software as gigabitethernet x/1/2 and x/1/4 andtengigabitethernet x/1/1 and x/1/2, with x being the switch number on Catalyst 3750-X stacks. The Catalyst 3560-X switch port numbers are the same, with no switch number.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/15.0_1_se/configuration/guide/swint.html#wp1878796

Hope this helps.

New Member

3560X port numbering/interfaces

Thanks Leo.  I re-read and finally got it.  I appreciate your assistance.

New Member

3560X port numbering/interfaces

Hi Leo,

No TenGigabitEthernet SFPs; wish we did.  For the 3560X with 4 1Gig SFPs, the port numbering would be 1/1, 1/2, 1/3, and 1/4?  Thank you.

Silver

Re: 3560X port numbering/interfaces

Hi,

Thanks, I'm glad I was able to help.

Regards,

221
Views
0
Helpful
4
Replies