Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3650 MAC ACL Problem

Dear All,

 

We installed cat3k_caa-universalk9.SPA.03.03.00.SE.150-1.EZ.bin IOS version in our 3650-24TDS.

 

We configured MAC ACL on each port, We are trying to add 1000+ permit lines for extended MAC ACL, when we are add more than 600 or 650 permit lines we are getting error below.

 

“Aug  7 05:48:37.732: %ACL_ERRMSG-4-UNLOADED: 1 fed:  Input MAC Port ACL on interface Gi1/0/1 for label 4 on asic0 could not be programmed in hardware and traffic will be dropped.”

 

Kindly requesting help!

Everyone's tags (1)
1 REPLY

Hey,Check the TCAM

Hey,

Check the TCAM utilization and sdm template you are using on the box. Share the following outputs:

#show plat tcam utilization

#show sdm prefer

HTH.

Regards,

RS.

73
Views
0
Helpful
1
Replies