Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3750 Boot Issue

Hi all,

I have a 3750 switch which is doing something odd. When booted it loads the IOS and appears to pass the POST. Right at the end of the boot process where it would normally come up with the login prompt it seems to just hang and I get a flashing cursor. The unit is otherwise unresponsive to key strokes. Anyone suggestions? TIA!

1 REPLY
Silver

Re: 3750 Boot Issue

Two suggestions:

1. Are you absolutely sure 'no exec' is NOT on the 'line con 0' config on the switch?

2. Follow the config or password recovery steps to bypass the config and see if the boot completes.

These switches have a limited lifetime warranty so you should be able to open a TAC case using the switch serial number to help get this resolved...

155
Views
0
Helpful
1
Replies
CreatePlease login to create content