As per the output following observation can be taken into account
Processor memory utilization is 45.8964%. Processor memory or main memory stores the running configuration and routing tables. The Cisco IOS software executes from main memory.The amount of processor memory required by the router is affected by the Cisco IOS version used, the size of the network and by the access list configurations. Ensure that an optimal IOS version has been chosen.
And few interfaces are having inpurt error also and can you also paste show process memory and show version output also.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...