I would like to know if I can do the following.... Instead of having 8 different DHCP servers, I want to have one single DHCP server in my building (8 Floors)running a superscope for all different subnets. Using 3750's POE is this possible ? I would also like to desiginate from that superscope a particular subnet to each floor.
ip dhcp excluded-address 10.18.23.220 10.18.423.254
ip dhcp pool vlan46
network 10.18.23.0 255.255.255.0
dns-server 10.3.3.11 10.3.3.12
netbios-name-server 10.3.3.11 10.3.3.12
If you use a PC with windows or linux as a dhcp server, you have to make shure that the DHCP Request from the client reaches the DHCP Server. TO do this in the VLAN of the ClIENT you have to configure a helper address pointing to the dhcp server.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...