Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
688
Views
0
Helpful
5
Replies

3750 port disables

xhackuss1
Level 1
Level 1

‎09-19-2007 04:02 AM - edited ‎03-05-2019 06:34 PM

I have a 3750 switch that is been used as a distribution switch. I have a number of vlans on the switch.This switch is connected to a catalyst 6500 switch through ospf. This connection has been in place for about 3 years now without a problem. Lately, the interface on the 3750 (gigabit port,L3) has been giving me sleepless nights. everyday,the port shuts down and i either have to restart the switch or remove the fiber cable and re-insert it before the link comes up. I am at wits-end. Can somebody tell me what could be the problem and suggest how I can get it fix.

Labels:
0 Helpful
5 Replies 5

pciaccio
Level 4
Level 4

‎09-19-2007 04:07 AM

There are several areas to check:

Check your logs to see of any port/interface issues from both sides

Check the port/interface stats for any excessive errors (Both sides)

revalidate your fiber cabling and see that all connectors are snugly in place (maybe someone messed with the cabling).

Do these basic checks and then see what you find... Good Luck...

0 Helpful

guruprasadr
Level 7
Level 7

‎09-19-2007 04:08 AM

Hello,

Do you see some Logs in the Switch during this Incident occurance.

Pls provide us additional INFO to help on this Incident.

Best Regards,

Guru Prasad R

0 Helpful

xhackuss1
Level 1
Level 1
In response to guruprasadr

‎09-19-2007 05:15 AM

Thanks a lot.Below is an output of "show logging"

DSwitch#show logging

Monitor logging: level debugging, 0 messages logged

Buffer logging: level debugging, 114

Log Buffer (4096 bytes):

face GigabitEthernet1/0/26, changed state to up

23:45:51: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26

from LOADING to FULL, Loading Done

23:46:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/23,

changed state to down

23:46:12: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/23, changed state to down

23:46:15: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/23, changed state to up

23:46:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/23,

changed state to up

1d02h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om FULL to DOWN, Neighbor Down: Dead timer expired

1d15h: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, ch

anged state to down

1d15h: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to down

1d15h: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to up

1d15h: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, ch

anged state to up

1d15h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om LOADING to FULL, Loading Done

1d15h: %PHY-4-EXCESSIVE_ERRORS: Excessive FCS, data, or idle word errors found o

n interface Gi1/0/23

1d18h: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, ch

anged state to down

1d18h: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to down

1d18h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om FULL to DOWN, Neighbor Down: Interface down or detached

1d18h: %SUPERVISOR-3-IIC_INIT: IIC Reinitialized

1d18h: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to up

1d18h: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, ch

anged state to up

1d18h: %PHY-4-EXCESSIVE_ERRORS: Excessive FCS, data, or idle word errors found o

n interface Gi1/0/10

1d18h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om LOADING to FULL, Loading Done

1d18h: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, ch

anged state to down

1d18h: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to down

1d18h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om FULL to DOWN, Neighbor Down: Interface down or detached

1d18h: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to up

1d18h: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, ch

anged state to up

1d18h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om LOADING to FULL, Loading Done

1d18h: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, ch

anged state to down

1d18h: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to down

1d18h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om FULL to DOWN, Neighbor Down: Interface down or detached

1d18h: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to up

1d18h: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, ch

anged state to up

1d18h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om LOADING to FULL, Loading Done

1d19h: %OSPF-5-ADJCHG: Process 222, Nbr 10.254.254.1 on GigabitEthernet1/0/26 fr

om FULL to DOWN, Neighbor Down: Dead timer expired

Awaiting our response

0 Helpful

Kevin Dorrell
Level 10
Level 10
In response to xhackuss1

‎09-19-2007 06:01 AM

Is this fiber? If it is 1000BaseSX, try changing the GBICs - they are terribly unreliable. I was told they use the same laser diodes as in cheap CD players, and they deteriorate with age.

It might be something else entirely, of course, but if you have any spare GBICs it is worth a go.

Kevin Dorrell

Luxembourg

0 Helpful

xhackuss1
Level 1
Level 1
In response to Kevin Dorrell

‎09-19-2007 06:24 AM

Thanks a lot Kevin. I will try that and see what's up

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card