I'm getting hich CPU utilization from process "HRPC qos request" on a Catalyst Express 500. I have about 15 phones, a 2811 running CME and a couple servers in this switch and the CPU is regularly spiking to 100% from this process. I have all the phone ports set to the default IP Phone SmartPort settings, and the router is set to the default router SmartPort settings. Everything else I've left as a default switch port. Any ideas where I should start troublshooting this?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...