Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3750 -- SNMP Monitor Port usage and CPU History?

Hey all,

Is it possible to use SNMP v3 to monitor Port Rx/Tx usage and switch CPU usage? We have 3750s and can't use Netflow.

Thanks!

Leam

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 3750 -- SNMP Monitor Port usage and CPU History?

What application are you using to do the SNMP polling? 99.9% of them have the MIB-II already and most already have the Cisco one. If it doesn't, you can download the appropriate MIB from Cisco at http://tools.cisco.com/ITDIT/MIBS/servlet/index. You will then need to import the MIB into your SNMP manager.

3 REPLIES

Re: 3750 -- SNMP Monitor Port usage and CPU History?

Yes you can use SNMP. MIB-II will have the interface OID's but you will need the Cisco MIB for CPU.

Hope it helps.

New Member

Re: 3750 -- SNMP Monitor Port usage and CPU History?

Collin, thanks! Do you have a pointer to what I need to read to figure this out? We have Cisco support on all our gear.

Thanks!

Leam

Re: 3750 -- SNMP Monitor Port usage and CPU History?

What application are you using to do the SNMP polling? 99.9% of them have the MIB-II already and most already have the Cisco one. If it doesn't, you can download the appropriate MIB from Cisco at http://tools.cisco.com/ITDIT/MIBS/servlet/index. You will then need to import the MIB into your SNMP manager.

988
Views
0
Helpful
3
Replies