10-13-2010 06:46 AM - edited 03-06-2019 01:29 PM
Hey all,
Is it possible to use SNMP v3 to monitor Port Rx/Tx usage and switch CPU usage? We have 3750s and can't use Netflow.
Thanks!
Leam
Solved! Go to Solution.
10-13-2010 07:05 AM
What application are you using to do the SNMP polling? 99.9% of them have the MIB-II already and most already have the Cisco one. If it doesn't, you can download the appropriate MIB from Cisco at http://tools.cisco.com/ITDIT/MIBS/servlet/index. You will then need to import the MIB into your SNMP manager.
10-13-2010 06:53 AM
Yes you can use SNMP. MIB-II will have the interface OID's but you will need the Cisco MIB for CPU.
Hope it helps.
10-13-2010 07:01 AM
Collin, thanks! Do you have a pointer to what I need to read to figure this out? We have Cisco support on all our gear.
Thanks!
Leam
10-13-2010 07:05 AM
What application are you using to do the SNMP polling? 99.9% of them have the MIB-II already and most already have the Cisco one. If it doesn't, you can download the appropriate MIB from Cisco at http://tools.cisco.com/ITDIT/MIBS/servlet/index. You will then need to import the MIB into your SNMP manager.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: