3750 Stack Configuration

[dvanzee]

Hello All - I currently have a 3750 stack which is comprised of

1- WS-C3750G-48PS-E

2- WS-C3750G-48PS-S

3- WS-C3750G-48PS-S

I am planning on removing the two "WS-C3750G-48PS-S" switches from this stack and adding one

WS-C3750G-48PS-E switch into existing switch stack.

The steps I plan on taking to complete this intigration are list below

1- Shut down and remove stackwise cable from existing standard switches

2- make sure the IOS code matches the existing WS-C3750G-48PS-E switch and connect stackswise cables

3- Change the switch priority of the new switch to "1".

Is there anything else I need to consider when doing this reconfiguration?

[Giuseppe Larosa · Accepted solution]

Hello Daniel,

it looks like correct only at step 1 may be easier to switch off the switch you are going to remove.

Another possible option is to provision the new switch before connecting it to current master.

see

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swstack.html#wp1177470

or

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swstack.html#wp1177470

Hope to help

Giuseppe