Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

vol
New Member

3750 stack member monitoring

Here is a problem with monitoring members in cisco 3750 stack.

Some info:
- Cisco Catalyst 3750-E
- 3 members in stack (1 24-port switch and 2 48-port switch)
- management ip address assigned to int vlan 1
-snmp service configured

Our task is monitoring the current state of stack members by snmp and
obtain temperature sensor information, fan status and power supply status.
With additional MIBs taken from cisco.com site we could obtain only
information from temperature sensors.
But fan status and power supply status of each member we can not
obtain. SNMP give such info only about stack master and no about other
members.


Can anybody suggest some way to solve this problem?

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: 3750 stack member monitoring

Thanks, but

A switch cluster is different from a switch stack.

We have switch stack.

Hi,

The best way to go about this is by use of the CiscoStackWiseMIB using snmp.Check out the below links for examples

http://jaguar.ir.miami.edu/cgi-bin/snmptransc.cgi

and in the "Object Identifier or Object Name" box, put .1.3.6.1.4.1.9.9.500

Select "tree translation" and you'll see all of the MIB objects this MIB supports.

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_white_paper09186a00801b096a.shtml (stackwise white paper)

http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_bulletin0900aecd803fdbd8.html

Hope to help !!

Ganesh.H

6 REPLIES

Re: 3750 stack member monitoring

Here is a problem with monitoring members in cisco 3750 stack.

Some info:
- Cisco Catalyst 3750-E
- 3 members in stack (1 24-port switch and 2 48-port switch)
- management ip address assigned to int vlan 1
-snmp service configured

Our task is monitoring the current state of stack members by snmp and
obtain temperature sensor information, fan status and power supply status.
With additional MIBs taken from cisco.com site we could obtain only
information from temperature sensors.
But fan status and power supply status of each member we can not
obtain. SNMP give such info only about stack master and no about other
members.


Can anybody suggest some way to solve this problem?

Hi,

Check out the below link for monitoring cluster switches

http://www-europe.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_se/configuration/guide/swclus.html#wp1029200

Hope to help !!

Ganesh.H

vol
New Member

Re: 3750 stack member monitoring

Thanks, but

A switch cluster is different from a switch stack.

We have switch stack.

Re: 3750 stack member monitoring

Thanks, but

A switch cluster is different from a switch stack.

We have switch stack.

Hi,

The best way to go about this is by use of the CiscoStackWiseMIB using snmp.Check out the below links for examples

http://jaguar.ir.miami.edu/cgi-bin/snmptransc.cgi

and in the "Object Identifier or Object Name" box, put .1.3.6.1.4.1.9.9.500

Select "tree translation" and you'll see all of the MIB objects this MIB supports.

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_white_paper09186a00801b096a.shtml (stackwise white paper)

http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_bulletin0900aecd803fdbd8.html

Hope to help !!

Ganesh.H

vol
New Member

Re: 3750 stack member monitoring

Thanks, it seems to be the best way to go.

New Member

Re: 3750 stack member monitoring

Orion able to monitor stack port.

Does Cisco Works LMS can monitor stack port?

New Member

monitoring stack port and

monitoring stack port and monitoring stacked switch status are two different things

is orion bringing out all these status events? ;)

1waiting
2progressing
3added
4ready
5sdmMismatch
6verMismatch
7featureMismatch
8newMasterInit
9provisioned
10invalid
11removed
8906
Views
5
Helpful
6
Replies