Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3750 stack swap out 24 port to 48 port

I need to swap out a 24 port 3750 in the centre of a stack and upgrade to a 48 port unit.

If I set the correct switch number and ensure that the IOS is the same as the existing, will the stack just add in the additional 24 ports as unconfigured?

Regards

Tony

1 REPLY
Hall of Fame Super Gold

Re: 3750 stack swap out 24 port to 48 port

Do a "sh running-config" and in the first 10 or 12 lines or so, you'll see something like "switch X provisioning WS-C3750G-24PS" (if your switch is a C3750G-24PS). Edit this to the model of your switch you want to put in, for example, WS-C3750G-48PS, and even before you put your switch in, you'll see that you can now provision this in your config.

Does this help you?

860
Views
0
Helpful
1
Replies