04-24-2009 03:02 AM - edited 03-06-2019 05:22 AM
Dear All
I am in process of upgrading 3750 stack switches using . bin image using TFTP server remotely.
The new image which is going to uploaed is already there in the TFTP server.
The stack switch has 3 memebers.
I am copying the . bin iamge from the TFTP server to flash file system of all the 3 switches
like
copy tftp falsh1:
copy tftp falsh2:
copy tftp falsh3:
then chaning the bootvaraible
#boot system switch all flash:/ name of ios file
then realod
could any one temm this procedure is correct and if it wrong please advice me on the same
regd
Srinivas
04-24-2009 05:59 AM
Hi,
Could any one help on these
regards
Srinivas
04-26-2009 04:00 PM
Hi Srinivas,
Copying an Image File from One Stack Member to Another
Hope this helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: