If I replace 3750 48 gigabit switch with a 3750 24 fast ethernet switch in the stack will the port configuration apply from the 48 port switch to the 24 port, also if I replace a 3750 48 switch with a identical 3750 48 switch will the port configuration apply exactly. Keep in mind this switches are the members not the master.
If you replace a 48 port switch with the same exact model with 48 port, you should be fine. To go from a 3750 48 Gig to 3750 24 fast, you need to deleted the 48 port from the stack and then add the 24 port.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...