Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3750 Stack upgrading IOS on master

If I upgrade the IOS on the master switch do I need to reboot the other switches in the stack?

2 REPLIES

Re: 3750 Stack upgrading IOS on master

Yes and you need to copy the new IOS image to each switch. You can run different minor versions, but not major. Here's a link for step-by-step instructions if you need it.

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml

Hope that helps.

Bronze

Re: 3750 Stack upgrading IOS on master

If you use 'archive download-sw...' command (you'll need the .tar image for Cat3750) then it will AUTOMATICALLY upgrade ALL switches in your stack.

After having verified that the image has been correctly installed in all switches in the stack by using the 'dir all-filesystems' and checking that the right image is in all flash devices (flash: for master; flash2: for switch 2 in the stack and so on), then you give the switch stack a reload command and all switches in the stack will reload.

HTH.

165
Views
0
Helpful
2
Replies