I am having some problems with a stack of 3750's I have and connecting a voip phone to a port on them. I have the ports set up correctly and I believe the phone but this is the first time I have connected a voip phone to a 3750 stack. Has anyone done this before and had a problem. seems the phone will not talk to call manager correctly.
Where is the call manager located, which vlan. in which vlan phones are connected. Have you created SVI's and other voice feature configuration. Please paste the switch config and also a network diagram.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...