Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3750 Stackwise problem

I have a stack consisting of 7 3750 switches, mixed 24T and 48P... When I hit the stack mode button between my switch 2 and 3 the port 23 on Switch 2 and the port 24 on switch 3 are amber.. ALl other switches in the stack have green lights indicating good link. Is this a potential bad cable or port? How can I verify. If it is a bad cable, can I replace without taking down the remaining stack members

Thanks

1 REPLY
Silver

Re: 3750 Stackwise problem

Catalyst 3750-E switch StackWise cable: remove and inspect the cable and StackWise port for bent pins or damaged connectors. If the StackWise cable is bad, replace it with a known good cable.

For more information please click following URL:

http://www.cisco.com/en/US/products/ps7077/products_installation_guide_chapter09186a0080763909.html#wp1065008

151
Views
0
Helpful
1
Replies