Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3750 Stackwise

Hi,

I can use just 01 stackwise cable to connect 02x3750 Switches. But, If I use 02 cables to connect him, Will I have any advantage or problem ? TKS

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 3750 Stackwise

You need 2 stackwise cables if you are trying to stack the switches.

See "Create a Switch Stack from Two Two-member Stacks"

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00807811ad.shtml#stack1

3 REPLIES

Re: 3750 Stackwise

You need 2 stackwise cables if you are trying to stack the switches.

See "Create a Switch Stack from Two Two-member Stacks"

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00807811ad.shtml#stack1

Super Bronze

Re: 3750 Stackwise

Roberto, just wondering, from your reference, it appears 3 or more member stack will run in a "half bandwidth", no redundacy configuration if there's a stack member down or cable is missing/defective. So you're saying a 2 member stack will not function, as a stack, without both cables?

New Member

Re: 3750 Stackwise

for 2 switch, you need 1 stackwise cable .

i don't think there is any advantage in using the second one .

more than 2 , you need the last one in the stack to connecto to the first to reseble a circular queue .

158
Views
0
Helpful
3
Replies
CreatePlease login to create content