10-29-2013 09:55 AM - edited 03-07-2019 04:18 PM
Hello All,
I am new to networking and I am learning switch stacking configuration.I am having following having issues.
(Both switches are compatible to each other)
Switch-2A# show switch stack-ports summary
Switch#/ Stack Neighbor Cable Link Link Sync # In
Port# Port Length OK Active OK Changes Loopback
Status To LinkOK
-------- ------ -------- -------- ---- ------ ---- --------- --------
1/1 Absent None No cable No No No 0 Yes
Switch-2A#en show switch
Switch/Stack Mac Address : e8b7.4843.1f00
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master e8b7.4843.1f00 1 1 Ready
Help me figuring out what is going wrong int the configuration.
Thank You,
Archana
Solved! Go to Solution.
10-29-2013 06:08 PM
10-29-2013 06:08 PM
Hi,
Can you try using a different stacking cable and test again?
HTH
10-29-2013 06:18 PM
Thanks for your response.
It worked after changing the cable.
10-29-2013 06:28 PM
Can you rate and mark the post as answered, so others can benefit from it?
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: