Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

3750E SDM Mismatch

Hello,

I have a stack of 4 x WS-C3750G-12S and am trying to add a 3750E switch. All switches have been loaded with a similar feature set (IPBase) and level of IOS:

c3750-ipbase-mz.122-40.SE.bin

c3750e-universalk9-mz.122-40.SE.bin

...and reloaded. However, I'm seeing an SDM mismatch with the new 3750E switch. Looking at "show sdm prefer" the existing 3750-12S have a default of "aggregate default" and the 3750E "desktop default". I changed both to "sdm prefer VLAN" and reloaded but it still reports SDM mismatch.

I notice the sdm prefer statement varies between switches - 3750-12S states "aggregate VLAN" and the 3750E "VLAN default".

I have got the 3750E working with a stahdard 3750 switch, so my question is, is the 3750E compatible with a 3750-12S given they have different default SDM templates? If so, what do I need to do to get them talking to each other?

Thanks in advance.

Phil

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: 3750E SDM Mismatch

Phil,

Here is why:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swstack.html#wp1189523

Try changing the sdm template on the master to "sdm prefer default desktop".

Hope it helps,

Gary

1 REPLY
Bronze

Re: 3750E SDM Mismatch

Phil,

Here is why:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swstack.html#wp1189523

Try changing the sdm template on the master to "sdm prefer default desktop".

Hope it helps,

Gary

686
Views
0
Helpful
1
Replies
CreatePlease to create content