07-24-2008 08:13 AM - edited 03-06-2019 12:26 AM
Hello,
I have a stack of 4 x WS-C3750G-12S and am trying to add a 3750E switch. All switches have been loaded with a similar feature set (IPBase) and level of IOS:
c3750-ipbase-mz.122-40.SE.bin
c3750e-universalk9-mz.122-40.SE.bin
...and reloaded. However, I'm seeing an SDM mismatch with the new 3750E switch. Looking at "show sdm prefer" the existing 3750-12S have a default of "aggregate default" and the 3750E "desktop default". I changed both to "sdm prefer VLAN" and reloaded but it still reports SDM mismatch.
I notice the sdm prefer statement varies between switches - 3750-12S states "aggregate VLAN" and the 3750E "VLAN default".
I have got the 3750E working with a stahdard 3750 switch, so my question is, is the 3750E compatible with a 3750-12S given they have different default SDM templates? If so, what do I need to do to get them talking to each other?
Thanks in advance.
Phil
Solved! Go to Solution.
07-24-2008 10:13 AM
Phil,
Here is why:
Try changing the sdm template on the master to "sdm prefer default desktop".
Hope it helps,
Gary
07-24-2008 10:13 AM
Phil,
Here is why:
Try changing the sdm template on the master to "sdm prefer default desktop".
Hope it helps,
Gary
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: