I have two 3750G switches that are interconnected via the 32-Gbps interstack cable. I have done nthing special in regards to the configuration of the two switches that I would not do for a single standalone switch.
My questions are in regards to the stats that SNMP monitoring pulls. When I look at the switch stats am I seeing stats from a single switch or both combiled? For example the CPU Utilization is at 5% but Memory Utilization is at 80%. Also is there a way I can pull stats regarding the utilization on the stackwise cable? I would think server to server communication would cross the stackwise cable and the 27-Gbps backplane but it does not seem to to monitorable as sat one of the gig interfaces are. I am using Solarwinds ORION as a monitoring platform.
I am just trying to understand waht I am seeing before I worry about false positives and the like.
good question... we are using Solar Winds Orion to do the same on stacked 3750's and the question of how CPU, Stackwise utilization, etc is represented never occured to me. I assumed one logical entity but if 2 ports on one stack member are doing all the talking then obviously only one of the CPU's in the stack of CPU's is busy. I guess it reports an average of all...
Does this show up as the Null interface? Unless there is something missing, I see my port channel, my regular interfaces and the null interface. Does it list something different under Solarwinds (10.0)?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.