I've been reading the documentation for the new 3750v2 switch, and I'm wondering is the IPBase license supports FULL OSPF.
The product sheet notes that it supports OSPF in the IPBase license, but then further down the page it notes that for advanced routing functions (EIGRP,OSPF) you need the IPServices license. So I'm a bit confused.
Are there any limitations to the OSPF process on a 3750v2 with the IPBase license?
According to the Feature Navigator at http://cisco.com/go/fn, the IP Base image for your 3750v2 supports a slightly limited OSPF:
'OSPF for Routed Access' designed specifically to enable customers to extend layer 3 routing capabilities to the access or Wiring Closet. 'OSPF for Routed Access' will support only one OSPFv2 and one OSPFv3 instance with a maximum number of 200 dynamically learned routes permitted.
OSPF for Routed Access: Starting from Cisco IOS Release 12.2(55)SE, the IP Base image supports a new feature called OSPF for Routed Access. OSPF for Routed Access is designed specifically to enable you to extend Layer 3 routing capabilities to the wiring closet. It supports only one OSPFv2 and one OSPFv3 instance, with a maximum number of 200 dynamically learned routes.
That should be fine. I can design the solution with those constraints in mind. Cisco really should say on their product page that it's OSPF for routed access. They say that the box supports OSPF with the IPBase image, but it's a bit of a lie as OSPF is full OSPF.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.