10-30-2014 09:41 AM - edited 03-07-2019 09:18 PM
Hi,
I need to add another 3750x to an existing stack of 3 identical 3750x switches. My understanding is as long as the code matches and I connect the new stack member powered off and then power it on after all connections are made that should work without any problems on a production network. Please advise if there is more I can do to ensure a flawless procedure.
Thanks.
Solved! Go to Solution.
10-30-2014 09:53 AM
Hi,
I would have an outage window just in case something goes wrong:
Also, Have a look at table-5-1 in this link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swstack.html#pgfId-1178950
Also see:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html#stack3
HTH
10-30-2014 09:53 AM
Hi,
I would have an outage window just in case something goes wrong:
Also, Have a look at table-5-1 in this link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swstack.html#pgfId-1178950
Also see:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html#stack3
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: