Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
Bronze

3750x add stack member

Hi,

I need to add another 3750x to an existing stack of 3 identical 3750x switches. My understanding is as long as the code matches and I connect the new stack member powered off and then power it on after all connections are made that should work without any problems on a production network. Please advise if there is more I can do to ensure a flawless procedure.

Thanks.

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Hi,I would have an outage

Hi,

I would have an outage window just in case something goes wrong:

Also, Have a look at table-5-1 in this link:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swstack.html#pgfId-1178950

 

Also see:

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html#stack3

HTH

 

1 REPLY
VIP Super Bronze

Hi,I would have an outage

Hi,

I would have an outage window just in case something goes wrong:

Also, Have a look at table-5-1 in this link:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swstack.html#pgfId-1178950

 

Also see:

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html#stack3

HTH

 

223
Views
5
Helpful
1
Replies
CreatePlease to create content