We have a WS-C3750-48TS-S which is connected via stackwise cables to a WS-C3750G-48TS-S. We want another switch and the Dynamic configuration tool when I inputted the 3750G recommended the WS-3750X-48T-S as a substitute. My question is: is the 3750X fully compatable with the 3750 and 3750G. If it is then all we have to do is update the flash on the old switches so that when I plug the 3750X it can join the stack.
Correct me if I am wrong, the IP services has SSH in it where IP base does not?? We need ssh capabilities. So far as the memory on the 3750, we could promote the 3750G as master in the stack and sunset the 3750 which would be replaced with the 3750X. Thanks for the great response.
Yes I agree with what you said. But over time the 3750X could become the master. Plus there is a big price difference between the IP base model and IP services 3750X. So I have to plan for variances and long term usage. Thanks for the response.
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
My question is: is the 3750X fully compatable with the 3750 and 3750G.
It is backward compatable, i.e. it gives up some of its improvements (for example, its StackringPlus reverts to Stackring.)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...