Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3750X switch with 10G service module, can the module be used to connect a server?

HI ,

On the Cisco 3750x , assuming the 3KX-SM-10G service module is installed with two ethernet sfp's.

Could a Netflow collector server be connected straight to one of these ports ?

Does Netflow monitor only these ports?, would the incoming traffic to be monitored need to come through the module's ports as well?, or would it monitor traffic coming through any of the regular ports?

 

thanks.

 

thanks.

1 REPLY
Super Bronze

DisclaimerThe Author of this

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Could a Netflow collector server be connected straight to one of these ports ?

Believe so, but likely a "waste" of an uplink port.

Does Netflow monitor only these ports?

Believe yes.

would the incoming traffic to be monitored need to come through the module's ports as well?

Believe yes.

See: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3750-x-series-switches/white_paper_c11-691508.html

139
Views
0
Helpful
1
Replies
CreatePlease login to create content