This seems to be common with this particular router model. Am I looking at two distinctly different bootstrap versions on the same router? Any idea why there would be two versions and, more importantly, if I'm updating the rommon image which version would I be updating?
Thanks for your help.
Performing a "showmon" from rommon mode displays the following:
ReadOnly ROMMON version is:
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
If I'm reading the above right than I am assuming the first Bootstrap version cannot be removed and the second is whatever latest release you have upgraded to. Input from anyone with additional insight would be greatly appreciated.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...