I have a Cisco 3825 router with a switchport module NM-ESW-16. I am using the switchport as a L2 switch with no problems, with the fastethernet ports configured that way, can ping etc on that module. What I can not do is get out of that module, I have another router connected. I created a VLAN (vlan 100) that has right now 1 port assigned but did have more. I can not ping from the router the workstation and cannot do vice versa. Below is my running config... just a note I do not start adding portfast, stp etc until I am sure it works that is why it is so basic right now.
current configuration : 3714 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname XXXXXX ! boot-start-marker boot-end-marker ! ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! aaa session-id common no network-clock-participate wic 1 ip cef ! ! ! ! no ip domain lookup ip domain name XXXXXXXXXXXXXXXXXX ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! voice-card 0 no dspfarm ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! username XXXXXXXX privilege 15 password 7 XXXXXXXXXXXXXXXX ! ! cem 2/0/0 payload-size 32 ! cem 2/1/0 payload-size 32 ! cem 2/2/0 payload-size 32 ! cem 2/3/0 payload-size 32 ! ip ssh time-out 60 ip ssh authentication-retries 2 ! ! ! ! ! interface Loopback0 ip address 220.127.116.11 255.255.255.255 ! interface GigabitEthernet0/0 ip address 18.104.22.168 255.255.255.252 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto media-type rj45 ! interface FastEthernet0/0/0 ! interface FastEthernet0/0/1 ! interface FastEthernet0/0/2 ! interface FastEthernet0/0/3 ! interface Serial0/1/0 no ip address shutdown clock rate 2016000 ! interface Serial0/1/1 no ip address shutdown clock rate 2016000 ! interface Serial0/1/2 no ip address shutdown clock rate 2016000 ! interface Serial0/1/3 no ip address shutdown clock rate 2016000 ! interface FastEthernet1/0 switchport access vlan 100 ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 ! interface FastEthernet1/9 ! interface FastEthernet1/10 ! interface FastEthernet1/11 ! interface FastEthernet1/12 ! interface FastEthernet1/13 ! interface FastEthernet1/14 ! interface FastEthernet1/15 ! interface Vlan1 no ip address ! interface Vlan100 ip address 22.214.171.124 255.255.255.240 ! router ospf 100 log-adjacency-changes network 126.96.36.199 0.0.0.255 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! ! control-plane ! ! ! ! ! ! ! ! !
! line con 0 exec-timeout 5 0 logging synchronous line aux 0 line vty 0 4 exec-timeout 5 0 transport input ssh ! scheduler allocate 20000 1000 ! end
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...