Hi,
I have just purchased and upgraded the IOS on my first 3845 router. I had some issue with installing the IOS, but managed to get the 3845 to accept the new IOS.
The router take a long time to reload and I am not sure if this is the correct operation ?
It would be appreciated if you could anyone could review the reload process and let me know if all is operating correctly (I think it is, but would like a second Opinion)?
reload
Proceed with reload? [confirm]
System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2005 by cisco Systems, Inc.
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Total memory size = 512 MB - DIMM0 = 512 MB, DIMM1 = 0 MB
c3845 platform with 524288 Kbytes of main memory
Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb40
program load complete, entry point: 0x80010000, size: 0x30eb878
Self decompressing the image : ########################################################################################################################################################################################################### [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
00042C 0X010D78F3 C3845 motherboard
000054 0X0004E480 4T Mueslix Serial
0X001E0000 OIR memory
00053A 0X000C2800 1-port FE HWIC
00053A 0X000C2800 1-port FE HWIC
0X00288860 Onboard PVDM2 SIMM
0X00281F0A Onboard VPN
0X000021B8 Onboard USB
0004F5 0X00016804 Virtual Private Network (VPN) Module
0X00660670 public buffer pools
0X0078F000 public particle pools
TOTAL: 0X0279D509
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 40Mb.
Using 7 percent iomem. [40Mb/512Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
3845 New IOS Installed - Slow reload
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 18-Jul-07 11:59 by prod_rel_team
Image text-base: 0x60010930, data-base: 0x637486D0
This product contains cryptographic features and is subject to United
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Installed image archive
Cisco 3845 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FCZ111270EC
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
4 Serial interfaces
2 Virtual Private Network (VPN) Modules
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
125440K bytes of ATA System CompactFlash (Read/Write)
Press RETURN to get started!
Thanks for your help.
